RK10314-15 Ethernet APL Registration Kit
Please complete the “FCG FR10344 Ethernet APL Product Registration Request Form” and send it to us along with a purchase order for the requested test or audit.
The following folders are found within this zip archive:
APL Power and Data Test Reports - Manufacturer
This folder should contain two sets of test results created by the manufacturer or a qualified 3rd party lab:
- APL Data Test Report that documents results for temperature and load extremes for Transmitter Output Droop and Transmitter Distortion.
- APL Power Test Report that documents results for temperature and load extremes for Ripple and Noise, Output and Input Current, and Output Voltage.
Intrinsic Safety (2WISE)
This folder should contain Proof of Intrinsic Safety (2WISE) Certification for EUT, else proof that Intrinsic Safety Certification Evaluation is underway. (Intrinsic Safety Certification is a pre-requisite for registration).
Policies and Procedures
This folder contains the applicable policies and procedures.
Product Data Sheets
The entire family of devices using this APL PHYsical layer that are to be considered for this effort must be described in the data sheet(s) provided. The Data Sheet(s) must include all the important values for the physical layer characteristics of the product or product family. Values required for the purposes of conformance test and audit must be found in the data sheet(s).
Product EMC Test Results
EMC Test Results Submission Form (FR10345) in this folder must be completed and returned to us prior to a scheduled test or audit.
The manufacturer is also required to provide a full EMC test report or an Abbreviated version of the EMC Test Report in this folder.
Software-Firmware-Instructions-Tools
A folder named “Software-Firmware-Instructions-Tools” has been provided for the manufacturer to provide any software tools, firmware, and other helpful
information that may be necessary to configure the test system and device for automated test. Please provide wiring diagrams and screen shots whenever possible.
If you are providing a server, or a piece of middleware, we will need IP address information for the EUT as well as the server. If there are explicit settings
required for the Telebyte Test System, this information should be found here.
User Guides
User Guides for products under test/audit should be found here.